? high reliability ?high radiant intensity ?peak wavelength p=940nm ? 2.54mm lead spacing ?low forward voltage ?pb free ? this product itself will remain within rohs compliant version. descriptions ?everlight?s infrared emitting diode (EAILP03RDAB3) is a high intensity diode , molded in a blue plastic package. ?the device is spectrally matched with phototransistor , photodiode and infrared receiver module. applications ? free air transmission system ? infrared remote control units with high power requirement ? smoke detector ? infrared applied system device selection guide led part no. chip lens color material ir gaalas blue 3mm infrared led , t-1 EAILP03RDAB3 features page 1 of 6 rev. 0.01
package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions 0.25mm absolute maximum ratings (ta=25c) parameter symbol rating units continuous forward current i f 100 ma peak forward current i fp 1.0 a reverse voltage v r 5 v operating temperature t o pr -40 ~ +85 c storage temperature t st g -40 ~ +100 c soldering temperature t sol 260 c power dissipation at(or below) 25 free air temperature p d 150 mw notes: *1:i fp conditions--pulse width 100 p s and duty 1 p . QQ *2:soldering time 5 seconds. Q catchode 1.00.2 1.0 min 2.54 anode 0.5 3.50.3 2.90.2 4.50.3 25.4 min datasheet EAILP03RDAB3 page 2 of 6 rev. 0.01
electro-optical characteristics (ta=25c) parameter symbol condition min. typ. max. units radiant intensity ie i f =20ma -- 5.6 -- mw/sr i f =100ma pulse width 100 p s ,duty 1 p QQ -- 28 -- i f =1a pulse width 100 p s Q ,duty 1 p. Q -- 280 -- peak wavelength p i f =20ma -- 940 -- nm spectral bandwidth ? i f =20ma -- 45 -- nm forward voltage v f i f =20ma -- 1.2 1.5 v i f =100ma pulse width 100 p s ,duty 1 p QQ -- 1.4 1.8 i f =1a pulse width 100 p s ,duty 1 p. QQ -- 2.6 4.0 reverse current i r v r =5v -- -- 10 p a view angle 2 1/2 i f =20ma -- 60 -- deg datasheet EAILP03RDAB3 page 3 of 6 rev. 0.01
0 -40 -20 40 20 0 60 10080 20 40 60 100 80 120 140 75 -25 0 25 50 100 900 920 940 960 980 0 10 10 1 10 2 3 10 4 1234 0 20 40 60 80 100 ta=25 c i f =50ma typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distribution ambient temp erature fig.3 peak emission wavelength vs. fig.4 forward current vs. ambient temperature forward voltage datasheet EAILP03RDAB3 page 4 of 6 rev. 0.01
-20 0.6 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 020 10 typical electro-optical characteristics curves fig.5 radiant intensity vs. fig.6 relative radiant intensity vs. forward current angular displacement 1 10 10 0 10 1 10 23 10 4 10 100 1000 i f -forward current (ma ) ie-radiant intensity(mw/sr) datasheet EAILP03RDAB3 page 5 of 6 rev. 0.01
packing quantity specification 1. 1000pcs/1bag,4bags/1box 2. 10boxes/1carton label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot num ber x: month reference: identify label number notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include material s protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. pb rohs everlight x EAILP03RDAB3 datasheet EAILP03RDAB3 page 6 of 6 rev. 0.01
|
